Revealed: Alpine's aggressive F1 aero updates for Imola

Alpine has arrived at Imola with yet more parts to test as it looks to recoup the losses that all teams were subjected to by the new aerodynamic regulations for this season.

Revealed: Alpine's aggressive F1 aero updates for Imola

This comes off the back of an intensive test program that the former Renault F1 team undertook a few weeks ago in Bahrain as it endeavors to return to the sharp end of the grid.

The updated parts that will be tested by Alpine in Imola focus on the front end of the car this time, rather than the floor as they did a few weeks ago. Although, that’s not to say that those parts won’t once again be drawn into their test program, as the team looks for ways to improve the global performance of the car.

Read Also:

The team have two options when it comes to the design of their front wing endplate, with a notch taken out of the upper rear corner on one design and not the other (red arrow). This is a design feature we’ve seen deployed by various teams since the regulations changed in 2019 and has an impact on the ‘outwash effect’ that teams are continuously tweaking in order to improve flow past the front tyre and refine the flow received by the floor downstream.

Alpine A521 front wing comparison

Alpine A521 front wing comparison

Photo by: Giorgio Piola

The team has also made changes to the shape of the front wing flaps at the inboard end (highlighted in green), with a new more curled-over design available for the team to trial at Imola. Changes made here are usually made in order to alter the shape and direction of the Y250 vortex, which is shed from the juncture of the front wing’s neutral section and mainplane section below.

Correlating with the front wing flap shape changes are alterations to the design of the cape too, with a revised inlet found in the central section (blue arrow), whilst a spear-like slat has also been added to the side of the cape (red arrow, inset).

Tech flashback to Bahrain trials

Alpine has already made significant changes to the A521 since it was first unveiled, with a slew of new parts tested during the first race weekend of the season. This resulted in it joining the growing ranks of teams using the Z-shaped floor cutout, with the team then pairing it with various other test items as it looked for the optimum level of performance from that area of the car.

Alpine A521 Floor comparison

Alpine A521 Floor comparison

Photo by: Uncredited

The floor tested during pre-season didn't have the Z-shaped cutout or fins (V1 and blue circle respectively). But, having installed a floor with the cutout, the team tested two other solutions.

V2 not only had the two silver-coloured fins mounted side-by-side and offset from one another, it also had two shorter triangular shaped fins mounted further downstream (red arrows). It decided to race a slightly less aggressive solution though, with just a single fin mounted on the edge of the floor cutout (V3).

A batch of solutions were also tested just ahead of the rear tyre too, with the single element strake used during the preseason test cast aside (V1), firstly in favour of the trio of strakes used during the back end of the preseason test (V2) and then in a combination test with two other solutions (V3 & V4).

V3 and V4 both have four sections to them, albeit in a slightly different way, with V3 only having slots a portion of the way down the surface, whilst V4 is made of four individual strakes.

shares
comments

Related video

Verstappen wants talks over FIA's 'messy' F1 track limits policing
Previous article

Verstappen wants talks over FIA's 'messy' F1 track limits policing

Next article

Alonso: I need to improve myself more than Alpine car

Alonso: I need to improve myself more than Alpine car
Load comments
The factors that could negate Red Bull's practice gap to Mercedes Prime

The factors that could negate Red Bull's practice gap to Mercedes

Mercedes led the way in practice for Formula 1’s first race in Jeddah, where Red Bull was off the pace on both single-lap and long runs. But, if Max Verstappen can reverse the results on Saturday, factors familiar in motorsport’s main electric single-seater category could be decisive in another close battle with Lewis Hamilton...

Why Norris doesn’t expect Mr Nice Guy praise for much longer Prime

Why Norris doesn’t expect Mr Nice Guy praise for much longer

Earning praise from rivals has been a welcome sign that Lando Norris is becoming established among Formula 1's elite. But the McLaren driver is confident that his team's upward curve can put him in the mix to contend for titles in the future, when he's hoping the compliments will be replaced by being deemed an equal adversary

Formula 1
Dec 2, 2021
What Ferrari still needs to improve to return to F1 title contention Prime

What Ferrari still needs to improve to return to F1 title contention

After a disastrous 2020 in which it slumped to sixth in the F1 constructors' standings, Ferrari has rebounded strongly and is on course to finish third - despite regulations that forced it to carryover much of its forgettable SF1000 machine. Yet while it can be pleased with its improvement, there are still steps it must make if 2022 is to yield a return to winning ways

Formula 1
Dec 2, 2021
How F1 teams and personnel react in pressurised situations Prime

How F1 teams and personnel react in pressurised situations

OPINION: The pressure is firmly on Red Bull and Mercedes as Formula 1 2021 embarks on its final double-header. How the respective teams deal with that will be a crucial factor in deciding the outcome of the drivers' and constructors' championships, as Motorsport.com's technical consultant and ex-McLaren F1 engineer Tim Wright explains.

Formula 1
Dec 1, 2021
How getting sacked from Benetton made Mercedes' Allison Prime

How getting sacked from Benetton made Mercedes' Allison

He’s had a hand in world championship-winning Formula 1 cars for Benetton, Renault and Mercedes, and was also a cog in the Schumacher-Ferrari axis. Having recently ‘moved upstairs’ as Mercedes chief technical officer, James Allison tells Stuart Codling about his career path and why being axed by Benetton was one of the best things that ever happened to him.

Formula 1
Nov 28, 2021
The remarkable qualities that propelled Kubica’s F1 comeback Prime

The remarkable qualities that propelled Kubica’s F1 comeback

It’s easy to look at Robert Kubica’s second Formula 1 career and feel a sense of sadness that he didn’t reach the heights for which he seemed destined. But as Ben Anderson discovered, performance and results are almost meaningless in this context – something more fundamental and incredible happened…

Formula 1
Nov 27, 2021
The humbling changes Ricciardo made to deliver for McLaren Prime

The humbling changes Ricciardo made to deliver for McLaren

From being lapped by his own teammate in Monaco to winning at Monza, it’s been a tumultuous first season at McLaren for Daniel Ricciardo. But, as he tells STUART CODLING, there’s more to the story of his turnaround than having a lovely summer holiday during Formula 1's summer break...

Formula 1
Nov 26, 2021
The potential benefits of losing the F1 constructors' title Prime

The potential benefits of losing the F1 constructors' title

As the battle continues to rage over the F1 2021 drivers' championship, teams up and down the grid are turning their attentions to the prize money attributed to each position in the constructors' standings. But F1's sliding scale rules governing wind tunnel and CFD use will soften the blow for those who miss out on the top places

Formula 1
Nov 25, 2021