Giorgio Piola's F1 technical analysis
Topic

Giorgio Piola's F1 technical analysis

Hungarian GP: Key F1 tech updates, direct from the garages

Join us as we delve into the latest technical developments from the Hungarian Grand Prix at the Hungaroring, courtesy of Giorgio Piola and Sutton Images.

Hungarian GP: Key F1 tech updates, direct from the garages
McLaren MCL35M detail
McLaren MCL35M detail
1/37

Photo by: Uncredited

A close-up of the front of the bargeboard cluster on the MCL35M with the boomerang now mounted over the most forward section. Note the various shapes of the fins mounted on the bargeboard clusters serrated footplate too.
Mercedes W12 engine detail
Mercedes W12 engine detail
2/37

Photo by: Giorgio Piola

The Mercedes W12 with the covers off provides a glimpse at their power unit layout, including the exhaust, intake plenum and the coolers that straddle the ICE. Also note the shape of the gearbox casing which forms the keel shape in order to improve its aerodynamic profile.
Max, Verstappen, Red Bull RB16B rear wing detail
Max, Verstappen, Red Bull RB16B rear wing detail
3/37

Photo by: Giorgio Piola

Red Bull with its high downforce rear wing for the Hungarian GP but note it is still not using a T-wing in combination, unlike most of its rivals. Also note the lack of Gurney flap on the trailing edge of the upper flap and the use of chequered stickers in order that they can monitor the rear wings flexion, just as the FIA are doing with their dot system.
Sergio Perez, Red Bull Racing RB16B rear wing detail
Sergio Perez, Red Bull Racing RB16B rear wing detail
4/37

Photo by: Giorgio Piola

A look at the rear wing assembly without the pillar bodywork gives us a great view of the DRS actuator housed within.
Red Bull RB16B brake duct detail
Red Bull RB16B brake duct detail
5/37

Photo by: Giorgio Piola

Red Bull's front brake duct assembly, which whilst not new does still feature aspects that are interesting, including the coating used on the crossover channel to reduce heat transfer from the brakes to the wheel rim and as a consequence the tyre.
A mechanic adjusts a front wing belonging to a Williams FW43B
A mechanic adjusts a front wing belonging to a Williams FW43B
6/37

Photo by: Mark Sutton / Motorsport Images

Williams preparing its car with some additional sensors mounted on the front wing endplate and footplate in order to monitor ride height and flexion.
Mechanics carry the floor of an Alfa Romeo Racing C41 into the team's garage
Mechanics carry the floor of an Alfa Romeo Racing C41 into the team's garage
7/37

Photo by: Mark Sutton / Motorsport Images

Alfa Romeo mechanics carry a floor into the garage giving us a great view of the underside and more specifically the make-up of the floors leading edge and the lowermost elements in the bargeboard cluster.
Front wing endplate detail of an Alfa Romeo Racing C41
Front wing endplate detail of an Alfa Romeo Racing C41
8/37

Photo by: Mark Sutton / Motorsport Images

This tilted angle of the Alfa Romeo C41's front wing shows off the cavity made in the footplate to enable airflow to flow from one side to the other.
Front wing detail of an Alfa Romeo Racing C41
Front wing detail of an Alfa Romeo Racing C41
9/37

Photo by: Mark Sutton / Motorsport Images

The footplate cavity on the Alfa Romeo C41's front wing can be seen at this angle too, whilst the mainplane arc where it meets with the neutral central section is not new but is an interesting and relatively aggressive variant.
Front wing detail of an AlphaTauri AT02
Front wing detail of an AlphaTauri AT02
10/37

Photo by: Mark Sutton / Motorsport Images

A close up of the AlphaTauri AT02's front wing shows a similar, albeit gentler curvature at the juncture of the mainplane and neutral section, whilst it also has a cavity in the footplate.
Front suspension detail of an Alpine A521
Front suspension detail of an Alpine A521
11/37

Photo by: Mark Sutton / Motorsport Images

Front inboard suspension detail of the Alpine A521, an area where the team appear to be making different choices for its drivers race by race in order to find the performance balance.
Bodtwork detail of an AlphaTauri AT02
Bodtwork detail of an AlphaTauri AT02
12/37

Photo by: Mark Sutton / Motorsport Images

The sidepod and engine cover of the AlphaTauri AT02 before being mounted but also note the double element and looped T-wing that the team will use too.
Front brake detail of a Ferrari SF21
Front brake detail of a Ferrari SF21
13/37

Photo by: Mark Sutton / Motorsport Images

Ferrari's front brake drum features a large hoop section to define the outer perimeter of the assembly, whilst airflow captured by the inlet traverses the cavity made between the drum and the wheel rim. Note the triangular strake used to help align the flow here too.
Alpine A521 rear wing detail
Alpine A521 rear wing detail
14/37

Photo by: Mark Sutton / Motorsport Images

A close-up on the outer portion of the Alpine A521's rear wing and the slots in the outer separator.
Ferrari SF21 barge board detail
Ferrari SF21 barge board detail
15/37

Photo by: Mark Sutton / Motorsport Images

A close-up of the SF21's bargeboard cluster, with the warped boomerang that connects with the sidepod deflector on the cars flank.
Ferrari SF21 aero detail
Ferrari SF21 aero detail
16/37

Photo by: Mark Sutton / Motorsport Images

A close-up of the endplate that bridges the two elements of the T-wing on the SF21.
Alpine A521 barge board detail
Alpine A521 barge board detail
17/37

Photo by: Mark Sutton / Motorsport Images

The bargeboard cluster and sidepod deflector array on the Alpine A521, note also the fluted shape of the cape beneath the nose.
AlphaTauri AT02 floor detail
AlphaTauri AT02 floor detail
18/37

Photo by: Giorgio Piola

Rather than replace the entire floor it appears that AlphaTauri has opted to bond a new section of the diffuser onto the old one.
Red Bull Racing RB16B rear detail
Red Bull Racing RB16B rear detail
19/37

Photo by: Uncredited

Red Bull's shotgun style exhaust layout with the main outlet on top and the wastegate pipe beneath. Also note the shape of the pillar that wraps around them, which is very different to the design we see elsewhere on the grid.
Red Bull Racing RB16B rear detail
Red Bull Racing RB16B rear detail
20/37

Photo by: Uncredited

A full view of the RB16B's diffuser with the full-length serrated Gurney-like extensions that were introduced several races ago.
McLaren MCL35M front detail
McLaren MCL35M front detail
21/37

Photo by: Uncredited

The McLaren MCL35M's inboard front suspension elements are on display in this shot as the team prepares the car for action. Note the green cover is used to protect the pitot array during transportation and whilst the rebuild is undertaken.
Mercedes W12 brake duct detail
Mercedes W12 brake duct detail
22/37

Photo by: Uncredited

The front brake assembly on the W12 without the cake tin shroud fitted affords us a view of the internal components. Also note the ancillary inlets amongst the cluster of winglets on the end fence.
Mercedes W12 detail
Mercedes W12 detail
23/37

Photo by: Uncredited

A close-up of the Mercedes W12's bargeboard cluster and the serrated footplate and fin cluster at the front of the assembly.
Mercedes W12 detail
Mercedes W12 detail
24/37

Photo by: Uncredited

A close-up of the sidepod deflectors which were updated by Mercedes at the British Grand Prix.
Mercedes W12 rear detail
Mercedes W12 rear detail
25/37

Photo by: Uncredited

A high-downforce rear wing and a double element T-wing has been installed on the W12 by Mercedes.
Red Bull Racing RB16B detail
Red Bull Racing RB16B detail
26/37

Photo by: Uncredited

Red Bull Racing RB16B detail
Red Bull Racing RB16B detail
27/37

Photo by: Uncredited

This close-up of the RB16B shows the contouring of the sidepods shoulder, the horizontal pod wing and the bridge wing which connects to the skyscraper deflector.
Red Bull Racing RB16B rear detail
Red Bull Racing RB16B rear detail
28/37

Photo by: Uncredited

The exhaust layout on the Alpine A521 has their two wastegate pipes emerge from either side of the rear wing pillars. Also note the small monkey seat winglet mounted on the pillars above the main exhaust outlet.
Red Bull RB16B rear detail
Red Bull RB16B rear detail
29/37

Photo by: Uncredited

A close-up of the louvres on the RB16B's rear wing endplate shows off their contouring but also note the change in thickness of the upper edge in order that the vortex shed from here is affected.
McLaren MCL35M detail
McLaren MCL35M detail
30/37

Photo by: Uncredited

A close-up of the McLaren MCL35M's diffuser which still retains the long strakes in the central section that are connected to the floor transition. Also note the louvres in the lower section of the rear wing endplate.
AlphaTauri AT02 detail
AlphaTauri AT02 detail
31/37

Photo by: Uncredited

The bargeboard and sidepod deflector region on the AlphaTauri AT02.
Alpine A521 detail
Alpine A521 detail
32/37

Photo by: Uncredited

Inboard suspension detail on the Alpine A521 along with a good look at the layout of their steering wheel too.
AlphaTauri AT02 rear detail
AlphaTauri AT02 rear detail
33/37

Photo by: Uncredited

A look beneath the covers of the AlphaTauri AT02 with its sidepod and saddle coolers visible. Also note the small monkey seat mounted between the rear wing pillars and above the exhaust to help with the higher downforce rear wing deployed in Hungary.
Aston Martin AMR21 detail
Aston Martin AMR21 detail
34/37

Photo by: Uncredited

A close-up of the edge of the Aston Martin AMR21's floor, with the wavy profiling of the floor scroll and Gurney-like flap above and the winglet cluster at the Z-shaped cutout all captured.
Aston Martin AMR21 detail
Aston Martin AMR21 detail
35/37

Photo by: Uncredited

A close-up of the outer corner of the diffuser on the Aston Martin AMR21. Also note the strakes on the lower corner of the rear wing endplate.
Aston Martin AMR21 front detail
Aston Martin AMR21 front detail
36/37

Photo by: Uncredited

A look at the front brake assembly without the cake tin assembly in place and the inboard suspension elements are on show as the mechanics prepare the car for action.
McLaren MCL35M detail
McLaren MCL35M detail
37/37

Photo by: Uncredited

Overview of the rear wing endplate on the McLaren MCL35M with its louvred panel in the upper section similar to what we see used elsewhere on the grid, whilst the inverted version in the lower section is still unique to them at this stage.

 


Read Also:

shares
comments

Related video

Grand Prix practice results: Bottas fastest in Hungary F1
Previous article

Grand Prix practice results: Bottas fastest in Hungary F1

Next article

Ferrari, McLaren, Lotus, Williams F1 cars in new Petersen exhibit

Ferrari, McLaren, Lotus, Williams F1 cars in new Petersen exhibit
Load comments
The factors that could negate Red Bull's practice gap to Mercedes Prime

The factors that could negate Red Bull's practice gap to Mercedes

Mercedes led the way in practice for Formula 1’s first race in Jeddah, where Red Bull was off the pace on both single-lap and long runs. But, if Max Verstappen can reverse the results on Saturday, factors familiar in motorsport’s main electric single-seater category could be decisive in another close battle with Lewis Hamilton...

Formula 1
Dec 4, 2021
Why Norris doesn’t expect Mr Nice Guy praise for much longer Prime

Why Norris doesn’t expect Mr Nice Guy praise for much longer

Earning praise from rivals has been a welcome sign that Lando Norris is becoming established among Formula 1's elite. But the McLaren driver is confident that his team's upward curve can put him in the mix to contend for titles in the future, when he's hoping the compliments will be replaced by being deemed an equal adversary

Formula 1
Dec 2, 2021
What Ferrari still needs to improve to return to F1 title contention Prime

What Ferrari still needs to improve to return to F1 title contention

After a disastrous 2020 in which it slumped to sixth in the F1 constructors' standings, Ferrari has rebounded strongly and is on course to finish third - despite regulations that forced it to carryover much of its forgettable SF1000 machine. Yet while it can be pleased with its improvement, there are still steps it must make if 2022 is to yield a return to winning ways

Formula 1
Dec 2, 2021
How F1 teams and personnel react in pressurised situations Prime

How F1 teams and personnel react in pressurised situations

OPINION: The pressure is firmly on Red Bull and Mercedes as Formula 1 2021 embarks on its final double-header. How the respective teams deal with that will be a crucial factor in deciding the outcome of the drivers' and constructors' championships, as Motorsport.com's technical consultant and ex-McLaren F1 engineer Tim Wright explains.

Formula 1
Dec 1, 2021
How getting sacked from Benetton made Mercedes' Allison Prime

How getting sacked from Benetton made Mercedes' Allison

He’s had a hand in world championship-winning Formula 1 cars for Benetton, Renault and Mercedes, and was also a cog in the Schumacher-Ferrari axis. Having recently ‘moved upstairs’ as Mercedes chief technical officer, James Allison tells Stuart Codling about his career path and why being axed by Benetton was one of the best things that ever happened to him.

Formula 1
Nov 28, 2021
The remarkable qualities that propelled Kubica’s F1 comeback Prime

The remarkable qualities that propelled Kubica’s F1 comeback

It’s easy to look at Robert Kubica’s second Formula 1 career and feel a sense of sadness that he didn’t reach the heights for which he seemed destined. But as Ben Anderson discovered, performance and results are almost meaningless in this context – something more fundamental and incredible happened…

Formula 1
Nov 27, 2021
The humbling changes Ricciardo made to deliver for McLaren Prime

The humbling changes Ricciardo made to deliver for McLaren

From being lapped by his own teammate in Monaco to winning at Monza, it’s been a tumultuous first season at McLaren for Daniel Ricciardo. But, as he tells STUART CODLING, there’s more to the story of his turnaround than having a lovely summer holiday during Formula 1's summer break...

Formula 1
Nov 26, 2021
The potential benefits of losing the F1 constructors' title Prime

The potential benefits of losing the F1 constructors' title

As the battle continues to rage over the F1 2021 drivers' championship, teams up and down the grid are turning their attentions to the prize money attributed to each position in the constructors' standings. But F1's sliding scale rules governing wind tunnel and CFD use will soften the blow for those who miss out on the top places

Formula 1
Nov 25, 2021